Encoder adapters

Absolute Encoder Adapter (REV-11-3326) connects the REV Through Bore Encoder directly to the SPARK MAX Data Port. This adapter connects the Absolute Duty Cycle output of the Through Bore Encoder to the correct SPARK MAX Data Port pins while leaving the incremental quadrature pins disconnected.

Alternate Encoder Adapter (REV-11-1881-PK2) connects the REV Through Bore Encoder directly to the SPARK MAX Data Port when the SPARK MAX is configured in Alternate Encoder Mode.

This adapter is not intended for use with the default Data Port configuration or with other devices with Data Ports (e.g. Talon SRX).

The SPARK MAX Alternate Encoder Mode enables the use of an alternative encoder source different from the default. This is especially useful when running one of the NEO Brushless Motors, as the default encoder port is occupied by the built-in NEO hall sensors. Please see the Alternate Encoder Mode section in the SPARK MAX User's Manual for more information.

Features

• JST PH 6-pin connector
  • Pinout Compatible with REV Through Bore Encoder
• Solder pad:
  • REV-11-3326:
    • Limit Switches
    • Ground
  • REV-11-1881-PK2:
    • Analog Input
    • 3.3V and 5.0V Power
    • Ground
• REV-11-1881-PK2: 
  • Index Signal/Absolute PWM Pulse selection switch
    • Selects which signal is connected to pin 4 of the Data Port

仓井空电影在线观看

• ION Build System Guide
• ION Brushless 仓井空电影在线观看
• Using Encoders with A SPARK MAX

CAD & Drawings

• REV-11-1881 STEP File
• SPARK MAX Motor 又污又黄又无遮挡的网站 & Alternate Encoder Adapter Onshape